hc cat. no. height above panel hole 5058-2 .125 (3.2) 5060-2 .250 (6.4) .120 (3.0) 5061-2 .375 (9.5) for # 4 5062-2 .500 (12.7) 5059-2 .125 (3.2) 5063-2 .250 (6.4) .140 (3.5) 5064-2 .375 (9.5) for # 6 5065-2 .500 (12.7) round h l.d. shank hex cat. no. height above panel diameter cat no. 2-56 thread .156 (4.0) o.d. 1589-2 .125 (3.2) .125 (3.2) 1731-2 1590-2 .187 (4.7) .125 (3.2) 1734-2 1591-2 .250 (6.4) .125 (3.2) 1740-2 1596-2 .375 (9.5) .125 (3.2) 1743-2 4-40 thread .187 (4.7) o.d. 2260-2 .125 (3.2) .139 (3.5) 2270-2 2261-2 .187 (4.7) .139 (3.5) 2271-2 2262-2 .250 (6.4) .139 (3.5) 2272-2 2263-2 .375 (9.5) .139 (3.5) 2273-2 2264-2 .500 (12.7) .139 (3.5) 2274-2 4-40 thread .250 (6.4) o.d. 1560a .125 (3.2) .187 (4.7) 1653-2 1790-2 .187 (4.7) .187 (4.7) 1746-2 1650-2 .250 (6.4) .187 (4.7) 1627-2 1651-2 .375 (9.5) .187 (4.7) 1628-2 1623-2 .500 (12.7) .187 (4.7) 1629-2 1624-2 .625 (15.9) .187 (4.7) 1654-2 1625-2 .750 (19.1) .187 (4.7) 1655-2 1792-2 .875 (22.2) .187 (4.7) 1749-2 1652-2 1.000 (25.4) .187 (4.7) 1630-2 6-32 thread .250 (6.4) o.d. 1560b .125 (3.2) .187 (4.7) 1620-2 1612-2 .187 (4.7) .187 (4.7) 1752-2 1546 .250 (6.4) .187 (4.7) 1621-2 1561b .375 (9.5) .187 (4.7) 1622-2 1604-2 .500 (12.7) .187 (4.7) 1758-2 1605-2 .625 (15.9) .187 (4.7) 1759-2 1608-2 .750 (19.1) .187 (4.7) 1761-2 1796-2 .875 (22.2) .187 (4.7) 1775-2 1609-2 1.000 (25.4) .187 (4.7) 1784-2 threaded l cat. no. length o.d. a thread 4860 .065 (1.7) .219 (5.6) .165 (4.2) 2-56 4861 065 (1.7) .219 (5.6) .184 (4.7) 4862 .125 (3.2) .219 (5.6) .184 (4.7) 4863 .250 (6.4) .219 (5.6) .184 (4.7) 4-40 4864 .375 (9.5) .219 (5.6) .184 (4.7) 4865 * .500 (12.7) .219 (5.6) .184 (4.7) 4866 .065 (1.7) .281 (7.1) .231 (5.9) 4867 .125 (3.2) .281 (7.1) .231 (5.9) 6-32 4868 .250 (6.4) .281 (7.1) .231 (5.9) 4869 .375 (9.5) .281 (7.1) .231 (5.9) 4870 * .500 (12.7) .281 (7.1) .231 (.59) clear hole l cat. no. length o.d. a hole 4850 .065 (1.7) .219 (5.6) .184 (4.7) 4851 .125 (3.2) .219 (5.6) .184 (4.7) 4852 .250 (6.4) .219 (5.6) .184 (4.7) .116 (2.9) 4853 .375 (9.5) .219 (5.6) .184 (4.7) for # 4 4854 . 500 (12.7) .219 (5.6) .184 (4.7) 4855 .065 (1.7) .281 (7.1) .231 (5.9) 4856 .125 (3.2) .281 (7.1) .231 (5.9) 4857 .250 (6.4) .281 (7.1) .231 (5.9) .143 (3.6) 4858 .375 (9.5) .281 (7.1) .231 (5.9) for # 6 4859 .500 (12.7) .281 (7.1) .231 (5.9) swage threaded standoffs swage / force fit standoffs 73 force-fit standoffs mounting holes: .147 (3.7) hole for 2-56 .166 (4.2) hole for 4-40 .213 (5.4) hole for 6-32 tolerance on mounting holes: + .003/-.000 a broaching-type fastener/standoff for installation in panels and circuit boards .060 (1.52) and thicker made of plastic and other non-ductile materials. available threaded or with clearance holes. easy to install, presses into punched or drilled holes. material: stainless steel per astm-a581/a582 round hex round o.d. h l.d. .105 (2.7) t h rea d hex l.d. thread h .105 (2.7) a o.d. l .060 [1.52] max. o.d. a .060 [1.52] max. l threaded clear hole material: brass, astm-b16, nickel plate (qq-n-290) for .062 (1.52) thick boards swage clear hole spacers swage staking tools material: brass, astm-b16, nickel plate (qq-n-290) for .062 (1.52) thick boards *thread depth .375 (9.5) precision made staking tool kits are made from .250 (6.4) diameter heat treated steel, zinc plated. each kit includes the correct swage top staking tool anvil to create a professional appearance. these tools may be used with an arbor press or hand tapped. cat. no. standoff dia. thread hole size tl-19 .156 (4.0) 2-56 tl-22 .187 (4.7) 4-40 tl-20 .250 (6.4) 4-40 tl-21 .250 (6.4) 6-32 .120 (3.0) .109 [2.8] .187 [4.8] c .250 [6.4] h tel (718) 956-8900 ? fax (718) 956-9040 (800) 221-5510 ? kec@keyelco.com www.keyelco.com 31-07 20th road C astoria, ny 11105-2017 rohs compliant ~ iso 9001 certified ? m60 section 4 frev1a-color_9-2011 4/4/13 5:07 pm page 73
|
